I shut the electricity off at the fuse box. I then removed the Door and Racks from the Oven to facilitate more access to the inside of the Oven. I removed the two plates holding the Bake Element secured to back wall inside the Oven. (Two Phillips Head screws). I disconnected the electrical spade connecters and removed the Baking Element making sure I did not let the Female connecter fall back into the insulation. I used two locking pliers one on each side to hold the Female connecters, while I placed the New Element in each connection. I suggest that you might want to wear a pair of gloves while installing the Elements , the metal securing plates edges are quite sharp and you could cut yourself while handling them.