Replaced with this kit. Because I had a different rack, it was not obvious how these went in. After trial and error, here’s how it worked out: the gray tine goes in the back, the white one in front. “U” bent end on the right. The light blue clip is the latch, it goes onto the farthest wire. The other two, darts blue and grey, seem to be the same. You have to position them so that the tines can’t slip to the left and come out of the latch. The second convertible tine latch was not needed for my install.
Very easy once I figured out what goes where. Also, this kit works with my dishwasher, Maytag MDB7751AWB, even though it says it doesn’t. It works with the replacement lower rack, which is different from the original. So if you get a lower rack with a big opening in the right rear this probably works!