I first, unplugged the range and pull it away from the wall. Then I removed all the visible screws from the rear of the top. Only the protective cover was required. Then I removed the screws from the Knob Assembly which lead me to the bracket which holds the top in place approx. 6 screws altogether.
I then was able to lift the range top up and see the wiring and burners. I took pictures of the exact wiring sequence on each part before removing any terminals for accuracy in replacement. The only thing I was not prepared for was to remove the plastic protective strips from the old top because there are no new one with the new top.
Next, I placed the new top and old top face down on a table and proceeded to remove all the burners and the indicator light and place them on the replacement top.
(Note) I then attempted to replace the protective plastic end covers, adhesive is not included,
Next, I got someone to hold the top in an upright position while I replaced the wiring harness to all of the burner assembly. I then reset the top in place, attached the holding bracket on the front end and checked to ensure it was secure. Next, replace knob assembly and rear guard. Job Completed