This is the most common part to go out when the fridge won't go into a defrost cycle. You have to store your food elsewhere for awhile on ice, unplug the unit so the back panel or wherever the coils are located can thaw out. Never use a screwdriver in these areas as you can puncture the line(s). The parts all need to de-ice so you can not only get the part out to replace but get everything back to square one again so the cold air can go down below to the fridge compartment. Once the part is cleared of ice it can be removed checked for continuity and sure enough it shows no continuity so its bad. Once its replaced and the panels put back in and the unit is plugged back in all is well again, just takes several hours to cool the fridge compartment down enough for food.