AppliancePartsPrtos.com had a video to diagnose GFCI fault source to the element. I disassembled the 26 yr old Frigidaire in the garage, removed the old element. With a DVM, I measured lead to lead a resistance of about 80 ohms. But from a a single lead to the element mid point, the resistance was 890,000 ohm. Anything less than 1,000,000 ohm (1 Meg ohm), is enough leakage to earth ground (the frame of the refrigerator), to trip the GFCI. Ordered the part, it was delivered in 24 hours, and installed. The kit included two aluminum tie wraps to fasten the element to the evaporator coil in the freezer. (Advice - 3 aluminum tie wraps is preferable too snug up the element across the bottom of the evaporator, because the original - salvaged one of the original factory ties.)