Do-It-Yourself Story

Replaced the Main Control Board and the Companion Board (part of the display panel). Note #1: Kit comes with 3 short and 2 long wire harnesses. The 3 harnesses bundled together with masking tape plugged into the main control board and then into the main wire harnesses from the refrigerator. Only one of the 2 longer wire harnesses supplied in the kit used the same color coded wires as the original wire harness from the refrigerator so that's the harness I used. Note #2: If you work with it, all the new connectors do fit into the gray plastic box. Note #3: Replacement of the main control board under the refrigerator is much easier if you lean the refrigerator backwards and put blocks of wood under the two front adjusters