Joseph G Loveland , CO March 12, 2014 The old element had burned out like a 4th of July sparkler 1) ordered new boiler element after searching for oven/stove model # online 2) unplugged oven 3) removed 2 screws holding element in place 4) pulled out the element and a length of wires attached to the element (enough that the wires wouldn't pull back into the hole after detached) 5) used needle-nosed pliers to detach wire clamps, noting which wire attached to which side of the old element 6) removed old element and its pieces from the bottom of oven 7) attached wires to new element, connecting the correct wire with the correct element terminal 8) stuffed the wires back into the hole, making sure they went behind the fireproof wool 9) reattached the element bracket with the 2 screws 10) tested oven and it works fine 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes