Some dishwashers have a user diagnostic mode that will test each component individually. I used that to single out the circulation pump.
Because it is on the bottom, I had to remove the dishwasher. Turn off that circuit, turn off the water feed, and disconnect both. Removed dishwasher from cabinet housing. The circulation pump connects to what seems to be the central drain for the unit, and because the small rubber hose that connects the two was damaged, I removed the central drain as well. That made it easier to replace the hose and put both back in their respective places. The pump worked but not without a few changes . The connecting hose that comes with the pump is curved, but the one on the dishwasher is straight, so that had to come off. The wiring connector is also not the same, so I removed the wiring connector from the dishwasher and connected the wires with solderless crimp terminals, and protected the terminals from moisture with a bit of hot glue.