Ron H Costa Mesa , CA January 22, 2016 Appliance: Model WHIRLPOOL Freezer cold but refrigerator wasn't Replaced evaporator fan. As stated on included paperwork, the terminals were on the opposite side from the original fan motor. I had to swap out and use the included longer harness. Even then, it was barely long enough. It was an easy fix, except for disconnecting the harness and for taking out the two mounting screws for the motor assembly. The 1/4" screw heads are 2 inches from the evaporator coils, so I couldn't use a driver. I had to use pliers since I didn't have a quarter inch open end wrench. 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes