Fridge not up to Electrolux standard, but it is a cheap counter depth full fridge. Two tools: #3 Philips and #2 slot screwdrivers. 5 minutes.
Use slot driver. Carefully slide the beauty shrouds off. (Plastic covers over screw heads.) Slide straight up or down not out.) Save them. Use Philips to slowly back 4 screws out Save. Be careful not to angle over. Remove plastic bag. Deeper end of handle goes up. CAREFULLY insert one screw into a top and bottom hole. GENTLY start to tighten down. Screws must be absolutely perpendicular to door. If screw jams, lays over, or gets hard to drive: stop, back out, start again.
With the two lightly screwed in, insert last two screws and loosely tighten. When all heads are down, check that everything is right and cinch them down. Don't over tighten. You can damage handle or holes in door.
Took longer to type this than do the repair.