Patrick M Fayetteville , NC February 13, 2021 Appliance: Model GE AJEH12DCBM1 The heat function on my GE ac/heat combo unit would drop out and blow unheated air a simple tap on board would bring the heat back so there was some failure on the board. UNPLUG THE UNIT. Remove filter. Remove 2 screws holding front of unit. Remove the front fascia by pulling out from bottom first. Remove knob facia, knobs and slide on switch limiter. Remove 2 switch retaining nuts. Remove 2 screws at top and bottom of metal cover plate.( If you know how, make sure capacitor is discharged, otherwise be careful to avoid being shocked). There are two screws near the transformer at the rear of the board to remove so old board will slide out. Simply exchange all board connections to the new board. The most difficulty I had was removing some of the connectors without damaging existing parts. A large flat head screw driver was used to gently pry them free. A friend to help hold new board while exchanging connections helps but not required. Reassemble the unit. Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes