My whirlpool refrigerator Model # ID5GFGXRS00 was not making any ice so I did some research and the first step I did was replace the water filter it did not work
I then replaced the water inlet valve waited 24hrs and still no ice was being made
I then ordered the ice maker assembly, keep in mind that the metallic arm does not come with the new part, you will have to use the old one.
Once the part came, I removed the 4 screws using my 1/4in wrench, a extender, and a 1/4 sae socket.
I then opened the front cover (that faces the freezer door) used a flat head screw driver and removed the wiring harness from the ice maker assembly
I put the old metallic icemaker arm onto the new assembly
Now the this particular model has the wiring harness directly connected within the freezer wall liner, so instead of the using the new wiring harness that came with the new icemaker assembly I used the older wiring harness and connected it to the new icemaker assembly. There was no way I could remove the old one, I asked the techs on this site if I could use the old one and they said yes.
Once the old harness was connected to the new assembly I screwed the 4 nuts from the assembly back onto the freezer and closed the freezer.
I waited 24hrs and I opened the freezer and saw some ice cubes populate (not too many but some)
48hrs later more ice started to populate.
Success!
My advice would be to remove all the ice from the freezer before you start so you know if ice is actually being produced 24hrs after installation.
I did not return my water inlet valve only because at some point it would of gone bad anyways so I saw it as future repair done now.