I loosen the four screws on the lower freezer door and removed the door. I then removed the lower freezer tray from the freezer compartment. Using the quarter inch nut driver I removed the lower screw on the icemaker and loosened the two upper screws. I then unplug the wiring harness and remove the old unit. Then I swapped out the wiring harness, the water chute and the wire ice arm to the new unit. And then reinstalled The new unit with the three screws and plugged in the wiring harness. I reinstalled the lower freezer tray and put the freezer door back on and tighten the four screws.