Figuring out how to remove the old sump assembly took me the longest, at about an hour, but popping the new sump assembly back in only took 30 minutes.
Remove the two screws holding the front plate on. Remove the washing trays. Remove the spray bar assembly.
Disconnect all the cable connections in the front of the sump assembly. Remove the one hose attachment with a pair of pliers that connects the drier to the sump. Rotate the two white holders that hold the sump to the tub. Press up from the underside of the tub to pop the sump assembly up. Disconnect the cable connections on the back side.
Do the opposite in reverse to install the new sump assembly.