Michael G Cherry Hill , NJ January 02, 2016 There was no led display on my jennair range yet everything else was working Purchased an oven control board though AppliancePartsPros. It was very easy to remove the panel but removing the four hex screws under the cover. I then pulled out the stove control knobs and removed the four machine screws situated underneath. That allowed the panel to be loosened. Once loosened, I removed the three ribbon cables and the two machine screws holding the Oven control board in place. Once I swapped out the board, I performed the reverse procedure I used to remove it. Piece of cake and worked flawlessly. Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes