Ron W Indianapolis , IN December 06, 2015 Needed to replace burner pan and igniter Very easy fix. Lifted off the grill and burner. Unscrewed 2 screws. Pulled the burner pan up and off. Disconnected the wire to the igniter. Used needle nosed pliers to remove the clip holding the igniter in place. Removed the gasket from the old burner pan. Placed the new igniter in the hole of the new burner pan and slipped the old clip on the igniter to hold it in place. Then put the old gasket on the new burner pan. Then connected the igniter wire to the new igniter and put the burner pan in place. Screwed down the burner pan, put on the burner and put the grill in place. Very easy fix. 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes