Vinnie S Torrington , CT June 06, 2020 Appliance: Maytag Slide-In Electric Range JES9900BAB19 Maytag Range Jes9900bab19: My problem was half of my push buttons stopped working. How to replace Control Panel. I replaced the entire control panel. It was pretty straightforward. Turn off power to stove. First you remove the knobs for the range burners. Then remove four 1/4” screws from under panel. Then remove the Philips screws on each corner. Remove the two Philips head screws on each burner knob. Pull away the old control panel. Once you get it over remove four Phillips screws from circuit board. Pull ribbon cable from control panel to circuit board by pushing in tab and pull in away from board. For the burner operation lights. First slide the lights off the red lens by sliding away from open end on light control. After you remove the four lights, push the red lens from the inside out. Then, re-install everything in reverse order. Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes