I followed the video directions, fortunately for me, taking the valve out didn't even involve disconnecting any wired plugs- only one plug was there with enough wire to pull the valve out far enough to disconnect the bad tubing and go from there. Everything else was just as explained in the video but, I did have to trim the tubing to make it fit because it was almost a foot too long. Works fine, no leaks and now I have cold water and ice-cubes (they continued to work even with the split in the fill line, don't ask me how). I used a two-wheel hand truck with an ratchet strap to move the fridge. The cooling coils were very clean, but the floor was nasty. Had to get rid of a lot of junk in the fridge before we even moved it (used big coolers for frozen stuff).