Maytag DE512 Manufacture : Mid 90's. Initial attempt at solving noise was to replace:
Idler Assembly Wheel
Both Drum Rollers
Both Bulkhead Felts in front and behind Drum
Blower Wheel.
Tumbler Bearing Kit
Drive Belt
Also purchased new Blower Box Housing Felt Gasket and Related "you will need" Adhesive and a replacement Lint Trap.
NONE of which resolved the squeal and grinding noise. invested +/- $240.00
I determined all that was left was the motor. I ordered the replacement, +/- $105.00 with shipping.
If the wiring instructions are not included, contact AppliancePartsPros.com they will send you a pdf via email.
Install is a breeze, don't panic.
If required with you dryer;
Red wire: cut 1/4" spade and replace with provided 1/8" spade, same with yellow.
If your yellow is 2 yellow factory to 1: 1/4" spade, just repeat 2 wire in kind to 1/8" spade.
You will need to adjust the old Pulley AFTER Install to align the belt. 3/8" setting clearance is B.S. Install the Drive Belt, hand rotate drum in normal direction to align belt with Idler pulley. A 3/16" "long Allen wrench" will fit the set screw. The drive belt is installed FLATSIDE to drum. This allows the rib side to contact the pulley.
Have faith in directions and follow them.
The Tumbler Bearing kit will require a 1/8" drill bit and a rivet gun to install the new rivets included in the kit. "Piece of cake".
The Blower Wheel received was cracked, AppliancePartspros.com cheerfully sent a replacement with free shipping.
Use the glue on all felt applications it dries fast and is superior. A 1 1/2 inch overlap on Bulkhead Felt is fine. Be gentle with the metal tabs that hold the felt, do not use glue near the metal tabs, just the overlap. You don't leave felt too loose with waves or too tight eliminating flex of felt.
Blower Housing Felt is a tight fight as designed. Clean old glue and felt from metal housing. Only glue the face to the blower housing, not to the front bulkhead side.
Very long story short, this 20+ year old dryer runs like NEW and will likely out live me. These older machines are "proven work horses".
AppliancePartsPros.com are an excellent source and choice for parts. Bulk shipping was only $6.00 and prices blow local vendors out of the water.
All statements above are only my opinion, and installation statements are only tips and a description of my repairs to my dryer. If you do not know what you are doing, call a professional.
Dryer repaired, Story complete, Leaving now, Really now to go camping with my kids.
Good luck.