Do-It-Yourself Story

Slide dryer out-away from the wall. Turn it so you can access the back panel. Unplug the dryer..unscrewed the 3 screws on the upper back panel that holds the backsplash in place. Tilted the backsplash forward and released all three switches from the back panel by lifting up (small flathead screwdriver needed), the clip that "locks" the switches in place then carefully turning the switches counterclockwise to release from the backsplash panel. Slid the backsplash panel to the right and removed it. Replaced the new backsplash panel by inserting the tabs and sliding it to the left to "lock" it in place. Installed the 3 switches by carefully inserting them and turning counterclockwise until hearing the "click" which indicated that the switch tab has locked the switch in place. pull back the backsplash to line up the screw holes with the panel on the back of the dryer. Screw in the 3 screws to reattach the backsplash to the back panel of the dryer.