Removed loose glass shards. Opened the lower oven door, removed the 4 1/4" hex screws on the bottom of the upper door. Closed the lower oven, opened the upper oven door. Removed the two long silver Torx T20 screws behind the door handle while supporting the upper door face. Closed the upper door. Removed the 1/4" hex screws around the retaining frame, supporting the glass while removing the last screws. Removed the frame and the broken glass. Placed new glass kit in position with retaining frame, started middle top and bottom screws finger tight. Installed remaining screws around the frame and tightened carefully so as not to break the glass. Opened upper oven door. Supported door face on the lower oven door and aligned the silver screws through the face, finger tight. Closed the upper oven door, opened the lower oven door while supporting the upper door face. Installed the 4 screws in the bottom of the door (careful not to over-tighten). Closed lower oven door, opened the upper door and tightened silver screws.