Electrolux Freezer Gasket & Seal

The Gasket is an OEM part for Frigidaire refrigerators. This door gasket is crucial for creating an airtight seal around the door, ensuring that the cold air stays inside the refrigerator to maintain optimal food preservation conditions. The gasket helps to prevent warm air from entering, which can lead to frost buildup and increased energy consumption as the refrigerator works harder to keep its contents cool.

The primary cause of gasket wear and tear is frequent use, which can stretch or damage the seal over time. Other factors include aging of the rubber material, which can lose its elasticity, and improper cleaning methods that can degrade the gasket's integrity.

Symptoms of a faulty Gasket include:

• Noticeable gaps or tears in the gasket, which can lead to cold air escaping.
• The refrigerator runs more frequently or for longer periods, indicating it's struggling to maintain the desired temperature.
• Condensation or frost buildup around the door edges, a sign that warm air is entering the refrigerator.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Gasket, in black, is an OEM part for Frigidaire refrigerators. This essential component provides a tight seal around the door to prevent cool air from escaping and outside air from entering. The gasket measures approximately 60-1/2 x 31-1/2 inches. 

Symptoms of a failing Door Gasket include:

• Condensation or frost buildup around the edges of the refrigerator door
• The refrigerator running more frequently or for longer periods
• A noticeable increase in the energy bills due to decreased efficiency
• The door not sealing properly, which can be felt as a slight resistance or ease when opening the door

Causes of a bad door gasket can include wear and tear from regular use, exposure to food oils and residue that can degrade the rubber, or damage from cleaning or accidental impacts.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This door gasket creates an airtight seal around your refrigerator or freezer door or lid, keeping cold air in and moisture out. Replace a worn gasket to restore temperature control, reduce frost, and support efficient operation.

• Forms a tight perimeter seal between the cabinet and door/lid to prevent air leaks
• Helps maintain stable internal temperatures and consistent cooling performance
• Reduces frost and condensation caused by a failed or leaking seal
• Common symptoms: visible tears or cracks, gaps, warping/shrinkage, door not sealing or staying closed

• Disconnect power; remove items from the door/lid as needed
• Warm the new gasket (soak in warm water or gently heat) to make it pliable, then straighten corners
• Fit the gasket into the channel or under the retainer, working evenly around the perimeter
• Check closure all around with a paper test; adjust hinges/leveling as needed and allow the gasket to relax and conform

This door gasket creates a tight seal between the appliance door and cabinet to keep interior temperatures stable and moisture out. Replacing a worn gasket restores a firm door close and helps reduce frost and energy loss. What it does

• Seals the door perimeter to prevent air leaks
• Helps maintain proper temperature and humidity inside the compartment
• Reduces frost/ice buildup and surface condensation around the door
• Common symptoms: torn/cracked or warped gasket, poor door seal or door popping open, frost at the door edge, moisture on the gasket, temperature fluctuations

• 1 door gasket

• Disconnect power before servicing
• Let the new gasket relax (room temperature or warm water); use a hair dryer on low to smooth waves
• Remove the old gasket from its retainer/channel and seat the new one fully, starting at the corners
• Close the door and check for uniform contact around the perimeter; gently heat/reshape as needed and allow time for the gasket to conform

The Evaporator Cover Gasket seals the perimeter of the freezer's evaporator cover to prevent air leaks that can lead to frost, moisture, and temperature swings. Replacing a worn gasket helps restore proper airflow and consistent cooling.

• Seals the evaporator cover to the liner to maintain directed airflow and contain cold air
• Helps prevent frost or ice buildup around the cover and on nearby air passages
• Can help address symptoms like temperature inconsistencies, poor cooling, or excess moisture caused by air leaks
• Replaces a torn, flattened, or missing gasket to ensure a tight cover fit

• Disconnect power before servicing; wear cut-resistant gloves
• Remove freezer shelves/bins and the evaporator cover to access the gasket
• Clean mating surfaces; press the new gasket fully into place with no gaps or twists
• Ensure air vents are unobstructed, reinstall the cover securely, then restore power

This refrigerator seal restores a tight barrier between internal components. Replacing a worn or damaged seal helps prevent air leaks and moisture intrusion, supporting proper airflow, stable temperatures, and reduced frost or condensation around the joint.

• Creates an air-tight barrier between mating surfaces
• Helps maintain correct airflow and temperature balance between compartments
• Reduces frost, condensation, and warm/cold spots near the sealed area
• Common signs of failure: visible gaps, loose/crumbled seal, rattling panel, moisture or frost at the joint

• Disconnect power before servicing
• Remove the related cover or housing to access the old seal
• Clean contact surfaces; install the new seal in the same orientation without stretching or pinching
• Reassemble and verify an even seal and normal airflow before returning to service