Electrolux Range / Cooktop / Oven Knob, Dial & Button

The Knob is an OEM part for Frigidaire ranges and ovens. It is used to control the temperature and settings for the stove's burners or oven functions, providing an interface for selecting heat levels and cooking modes.

You should replace this knob if it becomes damaged or worn out. Common causes of a bad knob include physical damage from impact, wear and tear from frequent use, or melting due to exposure to high temperatures.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Cracks or breaks in the knob
• Inaccurate temperature or setting adjustments

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Knob is an OEM part for Frigidaire ranges and cooktops. This knob allows users to control the settings and temperature of the burners or oven. It is designed to fit securely on the control shaft and provide easy operation.

Causes of a bad knob can include general wear and tear, exposure to heat, or accidental impact that leads to cracks or breaks. A faulty knob can hinder your ability to accurately control the cooking functions.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Visible cracks or damage
• Inaccurate temperature or setting adjustments

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement control knob restores reliable, precise control of your range. It presses onto the control shaft so you can select heat or temperature settings and replaces cracked, stripped, or missing knobs for everyday, dependable use.

• Attaches to the control stem to turn the switch or valve
• Lets you set burner levels or oven temperature, depending on the control
• Common failure signs: cracked knob, stripped insert, loose fit, missing knob, or difficulty turning the control
• Helps ensure the control can be turned fully to Off and desired settings

• Disconnect electrical power; for gas ranges, also shut off gas supply if working near valves
• Pull the old knob straight off the control stem; do not pry against the panel
• Align the new knob with the stem orientation and press straight on until fully seated
• Verify smooth operation and proper alignment with Off before use; do not force

Color: White

Replacement control knob for select ranges and cooktops. It mounts to the valve or switch stem so you can turn a burner or oven function on and choose a setting, restoring safe, reliable control. What it does:

• Attaches to the control shaft to operate a burner valve or control switch
• Provides on/off and level/temperature selection
• Common symptoms: cracked or broken knob, stripped insert/splines, loose or falling off, or inability to turn the control shaft
• Restores positive, accurate feel when selecting settings

• 1 control knob

• Disconnect power; ensure all burners are cool. For gas units, shut off the gas supply if needed.
• Pull the old knob straight off the stem; avoid prying against the bezel/control panel.
• Align the shaft flat/splines with the new knob and press straight on until fully seated.
• Test operation to confirm proper orientation and engagement.

This control knob replaces a worn or broken dial so you can select settings smoothly again. It restores a secure grip and clear pointer alignment, returning normal operation and a like-new look to your appliance. What it does:

• Attaches to the control shaft to operate the switch or thermostat
• Restores accurate selection when the original knob is cracked, stripped, loose, or missing
• Helps ensure the pointer/indicator lines up for clear settings
• Common symptoms: knob spins without turning the control, falls off, or is hard to grip

• 1 control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying at an angle
• Align the new knob with the keyed/flat shaft and press straight on until fully seated
• If your model uses a spring insert/retainer inside the knob, ensure it's properly seated or transfer it from the old knob

This replacement control knob restores smooth, accurate adjustment of your appliance's settings when the original is worn, cracked, or missing. Get a secure grip and the original look with a direct-fit knob that installs in seconds.

• Presses onto the control stem to actuate the underlying switch or valve
• Fixes knobs that are stripped, loose, wobbly, hard to turn, or missing
• Helps when the pointer no longer aligns with settings or the knob spins freely
• Direct-fit design maintains the original feel and operation

• Unplug the appliance or switch off power at the breaker before servicing
• Pull the old knob straight off; avoid bending the control shaft
• Align the new knob's insert with the flat/key on the stem and push fully into place
• Verify smooth rotation and proper engagement of the control

This replacement surface burner control knob restores a clean, precise feel to your range controls so you can set heat levels confidently. Ideal for replacing a cracked, stripped, or missing knob.

• Attaches to the burner valve or switch stem to select heat settings
• Common symptoms: knob wobbles, cracks, slips, or won't stay aligned with settings
• Restores accurate pointer alignment and consistent turning feel
• If the stem itself is damaged, the underlying valve/switch may also need service

• Turn the appliance off and allow all surfaces to cool
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press straight on until fully seated at Off
• Rotate through all settings to confirm smooth operation

The Knob is an OEM part for Frigidaire ranges. This component allows users to control the heat levels of the burners or the oven by turning the corresponding control shaft. It ensures precise adjustments for cooking and baking.

Over time, the knob can wear out or break due to frequent use, exposure to heat, or accidental impacts. Causes of a bad knob include cracking, stripping of the internal connection, or the knob becoming loose and difficult to turn.

Symptoms of a bad knob include:

• Difficulty in turning the knob
• Inconsistent or unresponsive heat adjustments
• The knob becoming loose or falling off
• Visible cracks or damage to the knob

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement control knob restores a secure fit and clear setting selection on your range or cooktop. It replaces a worn, cracked, or missing knob so you can adjust heat and functions with confidence. What it does:

• Attaches to the control shaft to select burner or oven settings
• Provides a clear pointer and solid grip for precise adjustments
• Helps ensure safe, reliable shutoff and operation
• Common signs of failure: cracked or stripped insert, loose/wobbly fit, knob falls off, hard to turn, worn-off markings

• 1 control knob

• Disconnect power; shut off gas and allow the appliance to cool
• Pull the old knob straight off the shaft—no tools are typically required
• Align the new knob with the flat (D-shaft) or spline orientation and press firmly until seated
• Rotate through all positions to ensure smooth operation—do not force

This replacement control knob restores smooth, positive control of your range settings. It fits over the control shaft so you can turn burners or oven functions on and accurately set heat levels, with a clear position indication.

• Attaches to the control shaft to operate burners or oven functions and adjust settings
• Replaces cracked, stripped, or missing knobs
• Helps when the knob falls off, spins without adjusting, or is hard to turn
• Restores clear pointer alignment and a solid, secure feel

• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the flat/D-shaped opening with the shaft and press firmly until fully seated
• Disconnect power before accessing or servicing any controls behind the panel

This is a replacement control knob for a range or oven control shaft. It restores a secure, easy-to-grip interface so you can set temperatures and burner levels without slipping or binding. What it does:

• Fits onto the control shaft and provides a grip for turning temperature and function controls
• Allows precise selection of heat/burner settings when original knob is cracked, stripped, or lost
• Prevents accidental spinning from loose or worn knobs
• Restores safe, predictable control operation

• Disconnect power to the appliance before removing or installing knobs
• Pull the old knob straight off the shaft; align the replacement spline and push on until fully seated
• For gas appliances, ensure all controls are off and follow appliance manufacturer safety guidance

This replacement control knob restores a secure, easy-to-read selector for range and oven front panels. It gives you a reliable grip and clear position feedback so temperature and function settings are simple to set. What it does:

• Replaces a missing, cracked, or worn selector knob so controls turn smoothly and hold set positions
• Provides clear tactile and visual feedback for temperature or function adjustments
• Helps stop slipping or loose control operation caused by a damaged knob
• Fits onto the appliance control shaft to restore normal user interface function

• Disconnect power to the appliance before servicing to prevent injury
• Most installations are straightforward: remove the old knob by pulling straight off the shaft and push the new knob onto the shaft until seated
• If the old knob is stuck, use a cloth and steady, even pressure; do not use excessive force or metal tools that could damage the shaft

This replacement control knob restores simple, reliable control of a stove, oven or cooktop function. It provides a solid grip and clear pointer so settings are easy to read and change. What it does

• Replaces a cracked, stripped or missing control knob so you can turn burners or oven functions smoothly
• Engages the control shaft for precise selection of heat or function positions
• Restores a visible pointer for setting accuracy and repeatable results
• Prevents slipping or accidental setting changes caused by damaged knobs

• Disconnect power (or gas) to the appliance before attempting service
• Align knob splines with the control shaft and push straight on until fully seated; do not force
• If the shaft is damaged or the knob won't seat, stop and inspect the control shaft or switch assembly