Frigidaire 137292700 Laundry Center Drum Belt OEM Part

Replaced the belt.

Ordered belt watched your repair videos and tips. Went without a hitch

Installed a new belt.

Used Repair video (which was for a slighter newer model) as a guide. Dissassembled front panel, control panel, dryer front panel, and removed belt access panel. Replaced belt. Reassembled everything. Biggest problem was reinstalling dryer front panel by myself due to alignment issues and weight. Ended up taking off door to Make panel lighter, then used duct tape on the top of dryer and top front of pane to make a temporary hinge. This gave me time to seat the 4 panel screws to the top. Then was able to realign drum into front panel and screw the panel back in place.

Had to take the top plate off. The front plate with door had to disengage from the drum. The belt was worked back to its normal position. The front plates, the front cover and the flat plate had to drop, so I could get hand into the motor pulley and tensioner spring. Belt over the pulley, tensioner engaged on belt. Reassemble. Worked first time. Took two trips to hardware store for screws. I had been into the front before, the plastic bearings that hold the drum in place were not engaged.