Snezana S Darien , IL April 02, 2018 F11 error code. Replaced EOC and overlay. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Woodson M Liverpool , NY March 07, 2016 F11 malfunction on the eoc board Replaced the EOC Board and Overlay, all is working fine now. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Michael B Arnold , MO December 31, 2018 Power dropped out randomly Replaced main board. Pulling off the front face is a little tricky. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Michael H Nashua , NH May 10, 2015 Appliance: Frigidaire Gas Range FGGF305MKFH Short in electrical control Removed the upper back panel (6 hex screws), removed control unit (4 phillips screws), changed all plugs from bad unit to new unit and attached in reverse order to the removal. Used a 1/4" socket set, but nut driver would have worked too. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
James G Las Cruces , NM October 05, 2015 Appliance: Model FRIGIDARE GALLERY OVEN The control panel was out I had a friend of mine come look at the board who is an electrical engineer and said the board was bad. I found your sight and ordered the part and it came in promptly. I was able to remove the old one and replace it with only a 1/4 inch socket and Phillips screwdriver. the only problem I had was the control panel did not come with an face plate and I called and the person told me that I would have to order that separately. I wish I had know up front. I was able to peel the one off of the old board and it went back on perfectly. Oven operates great...thanks... Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers