Horace V Clanton , AL May 09, 2020 Appliance: Model FRIGIDAIRE RANGE The bottom element would not heat up. After checking all connections to ensure power was getting to element. I ordered new control board and replaced it myself. Saved about $100.00 on a service call for someone to come out and replace it Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gary W Anderson , IN February 22, 2021 Electric range control panel overlay was cracked. Replaced the control panel overlay. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Elizabeth M Boca Raton , FL April 25, 2023 Electrical control panel wouldn't turn on. It was extremely easy to replace with the new one! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set
Peter M Salt Lake City , UT March 04, 2022 Appliance: Frigidaire Gas Range FFGF3054TSA Blown oven igniter went "poof!" with smoke at end of bake So initial thought was bad bake igniter. I'bve replaced this before so I replaced it again and it wouldn't glow. Checked broil igniter and same thing, no glow. Checked voltage at molex connector for bake igniter and it went from 6.6v to 3.4v when triggered to glow -- well below the 120v expected. Ordered new clock/controller and overlay -- it shipped the next business day! Removed a handful of screws from the back panel to expose the clock/controller and removed/ replaced it with new parts. Oven back in place and the both igniters glow! Super easy way to impress my wife and save some $$ , not to mention the time of waiting for an appliance repair person to come out and diag with a presumed week's wait for new part install. Whole process done in <15 min! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Casty H Jacksonville , FL January 24, 2023 Appliance: Model FFEF3016VSF Oven controller was bad. How I fixed it was to order a new Control Board and Overlay. The repair was fairly easy. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers