Gabriel C Jefferson , LA December 13, 2015 Appliance: Model KENMORE ELITE 790.75403501 Perforated skirt I thought this would be a simple remove and replace, boy was I wrong. This repair became more complicated then it should have been. The screws holding the skirt were frozen and broke when trying to remove. Had to end up cutting the skirt using a dremel and a cutting blade. Was able to remove one of the screws using a pinning plier. The other one I had to bore it out using a drill bit. Once that was done the rest was a breeze, discarded bad seal, clean the surface, install the new seal and skirt. If screws are in good shape this job should only take less than 15min. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Tom S Raleigh , NC November 11, 2014 Burner seals were harden from heat I removed 2 screws securing the burner cover plate, then replaced the seals located under the plate and replaced the screws. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Judith C Georgetown , IN September 24, 2016 The seals under the burners were broken and cracking With only a quarter inch socket to remove the burner assemblies, replaced the seals, put everything back together. Easy peasy! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Dan S Lincoln University , PA December 10, 2020 Crumbling range burner gaskets. Quick swap of gaskets. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Lupe S Ontario , CA November 10, 2021 Burner seals. I just replaced the seals on the burners on my cooktop. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Wrench Set