Ge WB30T10130 Cooktop Radiant Heating Element OEM Part

Two screws in the front, lifted top, removed old burner, replaced with new one. The trickiest part was getting the wires connections loose from the old burner.

Replaced the complete element and while removing the old one seen that one of the terminals had burned off so pitched the element and replaced the terminal on the wiring and installed the new element purchased fromAppliancePartsPros.com and now have a working element

Found and ordered new element. Arrived in 2 days. Very reasonable priced. Removed old element and replaced with new one. Instructions on the wer site were good. I had a little trouble removing and replacing the clips that secured the element to the stove surface.

I ordered a new heating element Halient 12 on line and replaced the bad one in 20 minutes. I watched a pregnant woman on Youtube do it so how could it be that hard? The trickiest part was finding a box to put under the top to hold it up while I worked under the top to replace the unit. A wrench and a screw driver is all I needed. It beats paying a repair professional or buying a new stove.

Bought replacement element. Unplugged range. Removed 2 screws under range top and glass hinged up. Propped with 2x4. Noticed one of the spade connectors for the inner section of element was broken. Removed all connectors and used screwdriver to pry up the 2 clamps holding the element in place. Installed new element, making sure to line up small spikes on clamp connectors with holes in element (digs into ceramic material). Reconnected spade connectors after removing deteriorated heat shrink. Not sure what temp. heat shrink for those connectors should be rated up to, but whatever was there didn't cut it. Plugged back in and tested. Working fine now.