Peter G Corinth , TX May 20, 2019 Appliance: General Electric Gas Range JGP337BEJ2BB Igniters clicking while cook top off, needed new harness switch Removed knobs ,burners, grates,etc.. Removed glass top. Removed wire harness switch. Wrote down location and sequence of removals. Reassembled same, and tried burners. All worked fine with no clicking when turned off. Be careful with glass top removal, use a thin putty knife to separate top from gasket seal. Seal must be in place before re positioning top. Reassemble in same sequence as removal. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers, Pliers
Bret D Katy , TX November 13, 2017 Appliance: General Electric Gas Range JGP330BEK2BB Igniter 'clicked' every five minutes all night long. Replacing the harness switch fixed the problem, the igniter now only clicks when starting the gas top. Unfortunatly, it was the last part I replaced - changing the igniter module did not fix it, nor did changing the electrical leads going to the ignitors. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Lorraine G Jefferson , GA May 04, 2022 Appliance: General Electric Refrigerator SSS25SGPASS Shorted wire harness. Replaced the ignition switch harness. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Timothy R Mckinney , TX December 02, 2014 Appliance: General Electric Gas Range JGP337BEJ3BB Liquid spilled under the knob and shorted out the igniter for that burner Removed the cover for the built-in cooktop and replaced the harness switch. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gerard G Sun City West , AZ November 11, 2019 Electrical harness for igniter failed Changed harness Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers