Michael S Mackinaw , IL June 28, 2021 Oven igniter Replaced with a new one from appliancepartspros,com. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Gary S Pittsburgh , PA February 01, 2025 Oven didn’t heat Replaced glow bar Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Peter B Kingwood , TX November 04, 2026 Appliance: Model GE JGBS86SP1SS Oven would not heat to proper temperature I discovered that my GE oven didn’t seem to be heating properly and found that the glowbar was not working to ignote the gas; only the top element was heating. I ordered the glowbar part from appliance pros. The first one that arrived, the glowbar was shattered. The glowbar is very fragile and it wasn’t packaged properly. I was shipped a replacement and that one arrived intact. The replacement project itself was pretty straightforward and easy. However the plug on the replacement did not match the plug on the oven. I was able to remove the plug on the new glowbar and rewire it with the plug on the old glowbar; it worked perfectly. I saw that many cut the wires and used wired nuts to reconnect. I prefer to not do that when possible. The oven works great now but there were a few hiccups along the way. Patience in this repair was key. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers, Socket Set
Gary B Lampe , MO October 03, 2025 Appliance: General Electric Gas Range PGB960SEJ1SS 10 minutes for the oven to light Replaced the igniter. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Mark H Kenosha , WI April 06, 2024 Appliance: General Electric Gas Range CGS995SEL1SS Top oven was not getting warm. Replaced the igniter You have to be careful when ordering the proper ignitor. This oven has 3. One for the top oven, one for the bottom oven broiler, and the third for the bottom oven's bake function. When I received my new ignitor, I had to swap out the electrical connector because the old one was a 3 place connector, and the new one was only a 2 place. You can do this with a paper clip. FYI Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers