George P Dickerson , MD January 09, 2026 Gas oven was taking a long time to heat up or not heating up at all Hardest part was moving the oven out and in. Everything else super easy using only a 1/4 inch socket. 1) Tested the ignitor/glow plug and it was not getting as bright/hot as compared with working ignitors. 2) Turned off electric and gass. Removed door, grates, cover plate, and pulled oven out from wall 3) Two metal screws removed with 1/4 inch socket remove the shield over the ignitor and another four screws removed the ignitor itself. 4) On the back side of the oven removed a small panel (also 1/4 screws) to access the ignitor harness. 5) Disconnected the harness and feed it through the hole. 6) Attached new ignitor in oven and feed wires and harness through to back side of oven and reconnect. 7) Turned on electric to Test igniter to check for bright glow. 8) Turned on gas and put everything back into place. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set
Anthony P Harper , TX August 25, 2025 Ignitor Replace it Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers