Ge WB06X10216 Latch Bracket OEM Part

If you search for this issue online, you’ll see this is caused by a faulty door switch - the primary interlock micro switch (with the red button). This switch is at the lowest position in the bracket that holds the switches. The hardest part for me was pulling the cover off. Two screws on one side of the black cover, one on the other side and several screws in back. The cover slides back. The switches are clearly visible on the right hand side. The white door paddle presses on the switch button to actuate it. That paddle makes it a little difficult to extract the switch from its clips, but it will come out. The switch pops out sideways, not straight back like you might expect. The switch was replaced with ease, and voilá, problem solved. The oven works as it should.

Replaced micro switch where door lock touches to make contact. Solved problem. Watched YouTube video first.

Information from ApplicancePartsPros site lead me to investigate the micro switches attached to the door latch. Found one switch no longer in place due to a broken door latch. Ordered door latch and installed. Microwave now works great.

Ordered both the door latch/spring and the latch bracket. Removed the door and took off the plastic cover. Managed to work the latch/spring out and installed the new latch and spring. This solved the problem, so I did not replace the Latch Bracket.