Paul S East Wenatchee , WA October 26, 2020 Appliance: Model GE RANGE ELECTRIC, GLASS TOP, ABOUT 12 YEARS OLD. Oven door wouldn't close tightly new hinges didn't fix the problem All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able to clean both sides of the three glass panels as well. An extra bonus. Door closes tight and locks without a nudge from the operator. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Rick N Port Washington , WI May 26, 2019 Appliance: Model JBP82TOF1WW The oven door was hard to open and the door would not close tight I replaced the door hinge and hinge receiver on both sides of the door. Removing the door was difficult because the hinges were worn down so much but once I got it off the repair went really well. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers, Socket Set
Ward B Conway , AR August 27, 2025 Screw head broke of handle Ordered the 3 parts that hold the handle to the glass. Replacements fit perfectly and the repair only took 10 minutes to complete. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers