Gary H Manteo , NC June 05, 2016 Appliance: Model GE JVM1440LK Noisy microwave stirrer motor I opened up the microwave where the noise was coming from. I searched the web to confirm this part could be failing and found the part name and number on appliancepartspros.com. I ordered the part on Monday and it was in my mailbox 2 days later. Two screws and two wire connectors later and the old one was out. I installed the replacement part and everything worked great, no more grinding noise. Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Michael F Harrisburg , PA May 10, 2020 Appliance: General Electric Free Standing Microwave JVM1851BF001 The microwave was making a loud grinding noise, like it was a coffee grinder. Found a replacement stirrer motor from Appliance Parts Pros.com.The motor arrived in less than a week. I removed the old noisy motor and installed the new one. Placed a glass of water in the unit to test, and the new motor made it sound like brand new. The actual repair was quite simple. You just remove the grill on the top ,front of the unit. Take out the charcoal filter, remove the cover just under the filter( a single screw on the front is all that holds it in place. Unplugged the power connector, on the front of the motor. Using a 1/4” ratchet , a 1/4” socket and a Phillips bit, (which was needed due to the height restriction) removed the two retaining screws. Pulled the old motor out and slid the new one in. Did the rest in reverse order of removal. ( there is nothing that holds the motor shaft in place, it just slides out and back in ) Read More... 6 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers, Socket Set
Thomas B Huntley , IL August 05, 2020 Noisy coming from behind vent in microwave. Ordered a new stirrer motor. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers
William S Nazareth , PA May 23, 2018 Appliance: General Electric Microwave JVM1750DM1BB Noisy microwave Replaced stirrer motor Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Wrench Set
Michael J Erie , PA March 13, 2022 Appliance: Model JVM1680WD 002 - GENERAL ELECTRIC Noise coming from the top vent of microwave when running. Replaced the stirrer motor located inside the discharge vent. Vent cover, internal charcoal filter, and motor cover removed. Unplug the motor and remove the two screws holding the motor in position. Dropped the new motor replacement in place and reversed the steps. The vent cover was removed by unscrewing the two Phillips screws located at the top of the grille cover (one on the top right and one on the top left). Slide the grille cover to the left with the microwave door closed and pull away from the unit. The motor cover has one Phillips screw in the front center. The motor required an off-set (right angle) screwdriver because of the limited space on the vent area. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers