Richard W Blue Grass , IA March 10, 2016 Appliance: Model 911.9534190 KENMORE Left front burner element died Turn off power at breaker box, remove four hex head screws under front of stovetop (lower oven door to access), lift and pull glass top towards front of stove and set aside. Remove wires from burner (gently wiggle them, they should stay in place for easy reconnecting). Remove burner from spring loaded stands and transfer mounting tabs from old unit to new attaching them in the same numbered holes. (A cordless drill with nut driver bit works best for this, don't over tighten screws! ) Replace on stands on stove, attach wires, align stovetop glass on range and push under control panel, align screw holes under stovetop, reinstall four hex head screws. (You will need to apply some downward pressure to glass to reinstall the screws, careful, don't overtighten .Turn on power, your done! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers