Huskee / Husky Log Splitter Parts

This breather cover plate replaces worn-out, damaged, or misplaced cover plates to ensure the outdoor power equipment runs as smoothly as possible.Breathers are essential for internal combustion engines, as they let gases escape from the combustion chamber. If gases cannot properly vent, pressure within the engine will build which can lead to ruptured seals. Eventually, this can cause oil to spill into the combustion chamber and is very problematic for the engine. Without a breather cover plate, the breather cannot function properly. This part should be replaced whenever it is worn out or shows signs of deterioration. This breather cover plate is a genuine MTD replacement part and has been sourced directly from the manufacturer. This replacement breather cover plate fits various different models of MTD, Cub Cadet, Yardman, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.

This governor arm assembly can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm assembly is a connecting part within the governor system; it contains the governor arm and the components that fasten the governor arm to the governor spring and the throttle linkage.Governor arms can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm can affect the functionality of the entire governor system, which could render equipment nonfunctional. If the governor arm or its fastener parts are damaged, a governor arm assembly should be ordered, and the damaged or broken parts should be removed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm assembly is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This component bracket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, leaf blowers, snowblowers, or log splitters. The component bracket for one of these small engine appliances is responsible for attaching other components to one another, clamping those components in place, and orienting those components in the proper direction such that the engine can operate smoothly.When damaged, component brackets can loosen or disorient the components they are attaching together. This damage can come in the form of cracks, tears, punctures, piercings, or erosion of the metal material. If the component bracket suffers enough damage that it can no longer hold parts in place, it should be removed and replaced with this genuine OEM replacement part before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This component bracket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This is a piston that is designed for use with several types of lawn and garden equipment. The main purpose of the piston is to seal off the pressurized combustion chamber from the crankcase. It takes the combustion power and transfers it to all of the working parts of the equipment. If the piston is going bad or has been damaged, the tool may have poor performance, the exhaust may create white smoke, or the equipment may burn oil excessively.A compression test can determine whether the pisons are malfunctioning. This involves taking a spark plug out of the engine and then starting the tool with a compression gauge attached to the cylinder where the spark plug used to be. If there is a problem with the compression, the piston will need to be replaced.This piston is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The piston is designed to be compatible with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This is a piston pin that is used in many types of small engine lawn and garden equipment. The piston pin is a component that connects the connecting rod to the piston. It acts as a bearer that allows the connecting rod to pivot whenever the piston is moving. The pin is a hollow rod made of durable materials but constant wear and tear can damage the part or cause it to break.If the piston pin is broken or damaged, it will need to be replaced. A pair of pliers and an Allen wrench may be needed to complete the replacement. The process involves removing the access covers and the housing from the piston crank. The old piston ring can be removed from the connecting rod so the new component can be installed. After installation, reassemble the equipment.This piston pin is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pin is designed to be compatible with wood chippers, log splitters, edgers, string trimmers, tillers, and lawnmowers manufactured by MTD, Craftsman, Yard Machines, and Cub Cadet.

This is a carbon canister assembly that is used to make lawn and garden equipment more ecologically friendly. When the engine is turned off, the fuel vapors from the fuel tank and carburetor are asborbed by the charcoal in the carbon canister assembly. It's part of an evaporative emission control system that captures hydrocarbon emissions.If there is a bad odor coming from the fuel, high emission levels, or pinging sounds, this could be an indication that the carbon canister assembly is failing. It can also cause weak performance from the equipment. If the carbon canister assembly isn't working properly, it will need to be replaced. Only basic tools are needed to remove the old carbon canister. The replacement component can be snapped in its place to ensure the equipment is capturing harmful emissions.This carbon canister assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. This part is designed for compatibility with lawnmowers, trimmers, wood chippers, log splitters, string trimmers, and tillers made by MTD, Cub Cadet, and Craftsman.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.