Kelvinator Range / Cooktop / Oven Trim
Genuine Frigidaire part
By: Frigidaire
Part Number: 316575500
The Vent Trim is an OEM part for Frigidaire ranges. This part frames and supports the oven's ventilation system, ensuring proper heat dispersal and maintaining the aesthetic integration of the range within the kitchen setup.
Common causes for vent trim issues include physical impacts during cleaning or use, thermal deformation from continuous exposure to high temperatures, and general wear and tear over time.
Symptoms of failing Vent Trim include:
- Loose or ill-fitting trim that may not stay in place
- Visible damage such as cracks or warping due to heat exposure
- Increased heat retention or abnormal heat outside the oven
- Aesthetic discrepancies that impact the overall look of the kitchen
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Kenmore oven plastic on door melted during cleaning cycle oven bottom cracked enamel Anna G. • Lake Zurich , IL • January 18, 2016
Had to order new plastic panel, scared to run the clean cycle again.
Read more
More
$83.58
- Compare At:
-
$99.46
- You Save:
-
$15.88
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935318
This Door Trim Kit restores the finished look and proper fit around the door. It replaces damaged or missing trim that frames the door/panel, helping secure outer components and refresh the appliance's appearance.
- Provides a clean, finished edge around the door perimeter
- Helps retain/position the outer glass or panel on applicable designs
- Replaces cracked, warped, loose, or missing trim that may rattle or leave gaps
- Common symptoms: visible damage, looseness, gaps, or cosmetic wear around the door
What's included: Door trim kit as supplied by the manufacturer. Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Protect the work surface; wear cut-resistant gloves and handle glass carefully
- Note orientation and fastener locations; transfer any reusable clips/screws from the original assembly
- After reassembly, confirm smooth door operation and proper alignment/seal
Do-It-Yourself Stories from Customers like You
An individual did not want to tie his stove down when he was transporting it because of the travel distance because he made a sudden turn the stove fell over breaking the glass front and framework David P. • Henderson , TX • January 29, 2015
Replaced the door trim by removing the 2 screws holding the oven handle on, then removing the 4 screws across the bottom of the door. lifted off the door trim with the plastic door cap. removed the door trim from the cap by sliding it out. attached the new door trim with the 4 screws that had been removed before. then slid the new glass into place. next i slid the plastic door cap onto the new door trim and the glass and centered the glass evenly over the door trim. finally reattached the...
Read more
More
$64.46
- Compare At:
-
$76.71
- You Save:
-
$12.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316491200
This replacement surface burner cap sits on top of the gas burner head to focus and distribute the flame for even, efficient heating. Replacing a damaged or missing cap can restore proper ignition and flame pattern. What it does:
- Covers and protects the burner head from spills and debris
- Spreads and concentrates the flame for consistent cooking performance
- Helps prevent yellow, lifting, or uneven flames when properly seated
- Common symptoms: uneven or yellow flames, poor simmer, delayed ignition, chipped/warped/missing cap
What's included:
Install notes:
- Allow the cooktop to cool; disconnect power and shut off gas if servicing beyond simple cap replacement
- Lift off the old cap and clean the burner head surface of residue or debris
- Center the new cap on the matching burner head so it sits level—do not force
- Use the correct cap for the burner position; test ignition and flame after installation
Do-It-Yourself Stories from Customers like You
Broken door handle and vent cap Emile R. • Snellville , GA • October 11, 2020
Parts arrived on time. All fit as expected.
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935192
Color: White. This is a 3-sided door trim kit.
Do-It-Yourself Stories from Customers like You
Trim on bottom of oven door was rusting Mark J. • Middletown , NY • March 16, 2014
Replaced the trim with a new trim kit. makes the stove look like new again
Read more
More
Kelvinator range/cooktop/oven trim replacement parts are crucial for maintaining the sleek look and optimal functionality of your kitchen appliances. These trim pieces not only enhance the appearance of your Kelvinator range, cooktop, or oven but also protect the edges and framework of the appliance from wear and tear. With the right Kelvinator range parts, you can ensure that your appliance continues to perform efficiently while looking its best.
Having access to reliable Kelvinator cooktop parts means you can easily replace worn or damaged components, preserving the overall integrity of your cooktop. Whether you need to replace the trim on your cooktop, range, or oven, using high-quality Kelvinator oven parts is essential. OEM replacement parts are particularly important, as they are designed specifically for your appliance model, ensuring a perfect fit and superior performance.
Knowing that you have access to durable and compatible Kelvinator range/cooktop/oven trim replacement parts gives you peace of mind. These parts are readily available and crafted to maintain the high standards of your Kelvinator appliances, ensuring they remain functional and attractive for years to come.
More