Kmart Lawn Mower Parts

This is a front steering gear assembly that is used in the construction of many models of lawnmowers. It is made of metal and links the drag links with the steering shaft pinion. This creates the ability for the drag links to turn the front wheels when a user turns the steering shaft. The front steering gear is an integral part of the steering assembly and any damage to the component will require replacing it.If the front steering gear assembly is broken or damaged, a replacement will require a socket set. The main symptom of a malfunctioning or faulty gear assembly is the inability to steer the lawnmower. Put the lawnmower on a stable surface and remove the spark plug wire. The steering assembly will need to be removed from the lawnmower to access the front steering gear. Disassemble the tool to reach the gear and remove it from the equipment. Replace with a new part and reassemble other components.This is an authentic OEM replacement component that is directly sourced from the manufacturer. The front steering gear assembly is sold as a single item. It is made for use with lawn mowers manufactured by MasterCut, Craftsman, Yard-Man, Troy-Bilt, Bolens, Murray, Huskee, Yard Machines, and MTD.

This oil fill tube assembly is a genuine MTD part, sold individually. This oil fill tube assembly can be used as a replacement part in lawn mowers, tillers, leaf blowers, and wood chippers. The purpose of the oil fill tube assembly in a small engine outdoor appliance is to allow the operator of the appliance to channel oil into the appliance so that the oil can be used to ignite the spark plugs and power on the engine for standard use of the appliance.This oil fill tube assembly might have to be ordered as a complete replacement part in an oil filler tube assembly that has been sufficiently damaged as to permanently affect its typical functionality for the appliance. If the oil fill tube assembly has been punctured, dented, torn, ripped, scraped, cracked, or eroded to the point of no efficacy, the oil fill tube assembly should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil fill tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Huskee, Yard Man, and MasterCut.

To hold the wheels in place and keep them at the proper height, lawn mowers require front and rear axles. This axle is a Craftsman part that will be compatible with virtually all mowers that use Craftsman's specifications. While the axle is durable, it's also the case that the most common problem with lawn mowers is encountering obstacles and barriers while mowing. Not only are blades and flywheels damaged, but it is often the case that axles are bent or broken so the mower cannot be pushed or the wheels cannot be made level. In such cases, it's necessary to replace the damaged axle. Replacing the axle is a matter of removing the wheels with a socket wrench and a 9/16 socket and setting the mower on its side. Make sure to place the air filter on top rather than on the bottom. Use a flathead screwdriver to force back the retaining tabs and remove the axle. When installing the new axle, make certain that the adjustment bar is placed on the right side of the axle housing. Reverse the removal process to reassemble. This replacement axle is a certified OEM replacement part that exactly matches the specifications of the original. This axle is compatible with mowers offered by Yard Man, Yard Machines, Troy-Bilt, Craftsman, and MTD.