Jimmy W B Springtown , TX November 11, 2017 Appliance: Model EP24G33B Heat element was out Replaced heating element with a new one Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
John W Molalla , OR November 25, 2017 No hot air on heat setting There was power to the heating element wires from the control box, but the heating element was open. Found a connecting wire in the heating element had corroded open. Replaced the heater assembly. I carefully cleaned and re tightened the spade connectors on the connecting wires and ran the unit for several minutes to make sure the connection wasn't getting hot. This is an important step to make sure the connections aren't overheating. If in doubt, replace the wires and connectors, and be sure to use parts rated for heater temperatures. I wasn't sure I could get at the heater assembly out from behind the evaporator, but there was enough flex in the copper refrigerant lines to carefully pivot out of the way. Needed to use a stubby phillips to detach the heater, but not as bad as I had thought. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers