Stephen E Apex , NC September 19, 2021 The stovetop burner stopped working. Unscrewed the stove top, unplugged the connections, removed the stovetop. Replaced the burner and the switch. Put it back together again. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Kenneth C Clermont , FL June 13, 2021 Burner not powering on and intermittent improper regulating. Parts received quickly. Nice. Unplugged appliances but a work issue arrived so plugged back in and pushed back into place Now it is working. Of course. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Bill N Oshkosh , WI October 25, 2020 Burner stopped heating Lifted the glass top, removed burner and replaced it with new part. Saved $100.00 plus doing it myself. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Edwin P San Antonio , TX September 13, 2020 Appliance: LG Electric Range LRE3083BD/00 Dual element went out. I was able to order the correct part, and installation took less than 5 minutes. The item received was the exact item needed. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Ronald R Groveland , FL July 31, 2021 Appliance: Model LG 2019 SLIDE IN RANGE The left front burner burned out on my 20 month old LG $2000 slide in range Because it was so new and called LG, but since I was out of the one-year warranty, I did not want to jump through 1000 hoops and wait. Got my part in 2 days with standard shipping. I watched a couple of YouTube videos, but could not find one with my newer model, but they were good to help. TAKE PICTURES OF EVERYTHING!! The wire harnesses, the burner wire connectors, and the burner two holding clips position numbers. All you need is to turn off the breaker and a #2 Phillips screwdriver. About 20 screws all around the top and under the front control panel with the oven door open. Carefully detach the 7 harness connections by pressing the flat center in where the locks are. If you have all the screws out the top will completely lift off from the front to the back. Carefully remove the burn connection wires (take a picture) and the holding clips come off the front of the TOP WHERE THE LOCATION NUMBER IS ( prying up with a flat screwdriver, Not the bottom where it’s held down in place. Reassemble the top. Note: the front rubber stripping protecting the edge falls off and is impossible to hold in place when reassembling the front panel. I used 5 small pieces of electrical tape to hold it in place, then pulled them out after the panel was installed. This was the first time that I have ever replaced an electric burner on a glass top stove. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers