Tom C Liberty Lake , WA September 26, 2021 AC fan motor. Disassembled and replaced ac motor. The hardest part was to pull the microwave out of the cabinet. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Robert Y Ormond Beach , FL May 01, 2020 Appliance: LG Microwave LMVM2033ST/00 LG microwave motor Replaced motor. Bearing failure. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Sergio Z Canyon Country , CA August 01, 2022 Appliance: LG Microwave LMV2031ST/00 Internal fan rattling noise when using microwave. Unplug unit from power. Remove top front trim and side control panel. Take a picture of electrical connections.. Remove top right metal cover to expose fan motor. Replace fan motor and also fan, reuse lock washer. Reassemble. Problem solved. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Ed B Great Falls , MT May 23, 2014 Motor quit but had power to the connector Removed the installed, disassembled the cover, replaced the motor, reapplied fingernail paint to the fan shaft locking keeper, and tested the function before reassembly. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Pliers, Screwdrivers
Russell S Moultonboro , NH January 06, 2025 Appliance: Model LG LMV2031BD Our lg lmv2031bd otr microwave started making scraping and clunking noises but continued to work fine otherwise Looked online and found that someone had experienced the same issue and had replaced the cooling fan assembly for the magnetron. I ordered the parts for the assembly (motor, fan, and support), and replaced them and this fixed the problem. It took about 10 minutes to replace the parts, but lowering the unit and disassembly took around 45 minutes. The most difficult part was getting the outer sheet metal cover back on after the repair, as it has a bunch of clips on each front edge that need to slide into the front panel frame. That took an hour of trial and error and a small amount of persuasion with a rubber mallet. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Screwdrivers