Christopher P Morganville , NJ November 06, 2015 Appliance: Model WM2350HRC Would not turn on at all electrical burning smell and smoke was noticed Repair was straight foward and fairly simple. Removed 4 Phillips screws from rear top of washer and lid slid back and off very easily exposing the internals of the washing machine. Smoke could be seen coming from main control board when it was plugged in so cause was fairly easy to isolate. Opened case of control box to access plug connectors. There are about 10 plugs of different sizes and colors. Simply unplugged all connectors and removed old unit. Installed new unit and plugged in all connectors. Reinstalled case cover and plugged in power cable. Pushed power button and it's fixed. Washer was only 4 years old when it failed so replacing it really wasn't an option. Cost less than 150$ to fix. A new Lg washer is over 1000$$. Just an additional note...make sure to take a photo of the main board before removing electrical connectors to make install easier and make sure main power cord is unplugged. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Geoffrey L Greensboro , NC December 24, 2016 Lg washer machine drum would not spin Changed the hall sensor but did not fix the problem. Then changed the motherboard and it fixed the washer. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers