Magic Chef Refrigerator Drawer, Shelf, Pan

The Crisper Pan is an OEM part for Whirlpool refrigerators. This component, often referred to as a crisper drawer, is designed to store fruits and vegetables at optimal humidity levels, helping to keep produce fresh for longer periods. It fits into the refrigerator's designated crisper area, providing an organized space for fresh food items. The pan measures approximately 13 inches by 10 inches at the base.

Symptoms of a failing Crisper Pan include:

• Cracks or damage to the plastic, which can cause spills or make the drawer difficult to slide in and out
• The pan not fitting properly into its designated slot, leading to a loose or wobbly fit
• Reduced ability to maintain optimal humidity levels, causing produce to spoil faster
• Difficulty in opening or closing the drawer smoothly

Causes of a bad crisper pan can include regular wear and tear from frequent use, physical damage from heavy items or impacts, and exposure to extreme temperatures or cleaning chemicals that can degrade the plastic over time.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

The Door Shelf Retainer End Cap is an OEM replacement part for Whirlpool refrigerators. This component is designed to secure and support the end of the door shelves, providing a clean and finished look while preventing items from falling off the edges.

Symptoms of needing to replace the door shelf retainer end cap include:

• Visible cracks, damage, or missing pieces
• Loose or wobbly door shelves
• Items falling off the ends of the door shelves

Causes of a faulty door shelf retainer end cap can include normal wear and tear over time, accidental impact or mishandling, or exposure to excessive moisture or temperature fluctuations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Crisper Pan is an OEM replacement part for Whirlpool refrigerators. As an interior storage component, it works to hold produce and vegetables in the refrigerator's crisper drawer. The perforated pan allows ventilation while containing items neatly in the drawer. Measures about 23 inches wide by 14 inches deep.

Causes of a bad crisper pan can include cracks, damaged corners, or rust inhibiting ventilation and container use.

Symptoms of a bad crisper pan include:

• Produce becoming damaged or spoiled more quickly
• Inability to fully organize items in the crisper drawer
• Warmer temperatures or excess moisture in the drawer area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Crisper Frame Support is an OEM part for Whirlpool refrigerators. This part provides structural integrity and support for the crisper drawer, ensuring it remains stable and functions smoothly. 

Causes of a bad crisper frame support can include regular wear and tear from frequent use, accidental impacts, or overloading the crisper drawer. 

Symptoms of a bad crisper frame support include:

• The crisper drawer not sliding in and out easily
• Misalignment or instability of the crisper drawer
• Visible cracks or breaks in the frame support
• Difficulty in opening or closing the crisper drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Shelf Retainer is an OEM part for Whirlpool refrigerators. This part holds and supports the shelves within the unit. This small but essential component ensures that shelves remain in place, preventing them from tilting or sliding out unexpectedly.  

Over time, shelf retainers can wear out or break due to the constant weight of items or from accidental impact. If you notice that your refrigerator shelves are not as stable as they used to be or if they easily slide out or tilt, it may be time to replace the shelf retainer.

Symptoms of a bad shelf retainer include:

• Shelves slipping or not staying in place
• Difficulty in keeping items organized due to shelf movement
• Visible cracks or damage to the retainer itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The crisper shelf center support stabilizes the pan cover above the crisper drawers to keep it level under load. Replace a cracked or missing support to restore proper shelf alignment and smooth crisper drawer operation.

• Supports the middle of the crisper cover/glass to prevent sagging
• Helps keep produce drawers aligned and moving without rubbing or binding
• Addresses issues like a dipping center shelf, sticking drawers, or visible damage
• Direct replacement for a broken, warped, or missing center support

• Unplug the refrigerator and remove food from the crisper area; lift out the glass/pan cover carefully
• Release the old support from its locking features/fasteners and remove it
• Seat the new support fully in the same location/orientation; reinstall the glass and drawers
• Handle tempered glass with care and wear cut-resistant gloves

This left-side freezer glide helps the freezer drawer slide smoothly and stay aligned, restoring proper drawer movement and preventing binding or sagging. Fits the freezer drawer track and supports normal opening and closing. What it does:

• Guides and supports the freezer drawer on the left side for smooth travel
• Keeps the drawer aligned to prevent scraping, sticking, or uneven movement
• Reduces chatter and wear on the drawer and track from improper seating
• Common symptom: drawer sticks, drags, or drops on one side when opening

• One left-side freezer glide

• Disconnect power before working on the appliance and remove food from the drawer area
• Remove the freezer drawer per the manual to access and replace the glide
• Use basic hand tools as required; avoid forcing parts to prevent breakage

This rear shelf trim finishes and secures the back edge of a refrigerator shelf, restoring a neat appearance and stable shelf seating. Use it to replace cracked, broken, or missing rear trim pieces. What it does:

• Holds and stabilizes the rear edge of the shelf so the glass or wire shelf sits correctly
• Covers exposed shelf edge for a clean interior look
• Helps prevent the shelf from shifting or snagging food items
• Commonly replaced when the trim is cracked, broken, loose, or missing

• One rear shelf trim

• Remove shelf from the refrigerator before replacing the trim; handle glass shelves with care
• Trim typically snaps or slides into place—no special tools required for most installs
• Clean mounting area and inspect shelf for damage before installing new trim