Mantis Engine Parts

This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

A throttle return spring is a coil-shaped metal mechanism designed for use with outdoor lawn and garden power equipment such as trimmers, hedge trimmers, tillers, string trimmers, pole pruners, cultivators, pumps, reciprocating saws, regular saws, edgers, leaf blowers and vacuums, and pole saws. It is compatible for use with products manufactured by Echo, Mantis, Little Wonder, and Shindaiwa.The throttle return spring pushes the throttle closed when the user lets off the gas. A weak or failed throttle return spring is dangerous because it will prevent the throttle from easily returning to its resting position. This could pose a serious safety hazard to the person operating the machine and anyone nearby. This throttle return spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Echo. This throttle return spring is made of metal.

The pipe clip is used to secure the vent pipe to the fuel tank vent, so the machine can be vented properly. It might need to be replaced because the current pipe clip has been lost. The clip could also become corroded or damaged and need to be replaced. Without a clip in good condition, it will not be possible to properly secure the vent pipe. The replacement of the metal pipe clip is simple. This is a genuine OEM replacement part and it is sold individually. The pipe clip can be used with a range of handheld lawn and garden machines including tillers, string trimmers, hedge trimmers, edgers, and chainsaws. Compatible brands include Echo, Mantis, and Little Wonder. Owners should always consult their manual to make sure they are buying the correct pipe clip and other replacement parts for their machines.

This air cleaner case offers additional protection to the air filter in lawn and garden equipment, which ensures no debris or dirt makes its way into the engine where it can cause problems with performance. The air cleaner case is created of metal and fits on top of the air filter. It includes ventilation slots to let air in. Over time or through impact, the case can become damaged or broken and will need to be replaced.A visual inspection of the air cleaner case will indicate whether the part is damaged. It could have broken holding tabs, a cracked surface, or holes in the material. If any of these things are noticed, the air cleaner case should be replaced. No tools are required. Take off the old case and install the new one.This air cleaner case is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. This case is designed for use with string trimmers, tillers, hedge trimmers, edgers, and pole pruners manufactured by Echo, Little Wonder, and Mantis. This part is sold individually.

This replacement prevent plate is a genuine OEM part for a gas-power trimmer. A prevent plate is similar to a washer but more intense in that it also holds down a bolt with added support. The prevent plate keeps the bolt from threading all the way down to the head and helps to redistribute some of the pressure throughout the connection. This makes for a much tighter connection that is less prone to unthreading. Bolts such as this should be checked during regular maintenance, and if found to be stripped or corroded, should be replaced with a new part. To remove the old bolt, use a wrench or socket wrench to first pull out the bolt and the switch out the prevent plate. The difficulty of this job will depend where the bolt is used, as they can be found in multiple parts of the engine. This replacement prevent plate is compatible with engines made by Little Wonder and Echo. It comes sourced from the original manufacturer and includes a prevent plate and a bolt. This part ships individually as a single unit.

This collar makes up part of the fuel assembly inside various types of lawn and garden equipment. The part is made of durable metal and attaches directly to the fuel tank. The collar ensures the fuel tank is protected from damage from the tool's metal screws. It also works to secure the fuel tank so the engine will power on. The collar can become damaged or worn through use and may need to be replaced.If the collar is broken, it will no longer provide protection for the fuel tank. It can also remove the tank's secure attachment to the rest of the equipment. When replacing this part, an Allen wrench or a screwdriver may be needed. Unscrew the fasteners that hold the collar onto the fuel tank to remove it from the tool. Reattach the new collar to the equipment's fuel tank.This collar is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The collar is designed to be compatible with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Shindaiwa, and Mantis.

This fuel pipe is one of two that regulates the flow of gasoline from the fuel assembly to the engine and dispenses overflow back to the tank.It comes into operation when pressing the fuel bulb overfills the carburetor. The return fuel pipe automatically returns the excess to the fuel tank. Over time the original pipe may deteriorate and have to be replaced. For machines that have some substantial use, it’s probably a good idea to replace the fuel assembly, the two fuel lines, and the fuel filter along with the fuel pipe. This genuine OEM manufactured part replaces the original fuel return line. The pipe is used with hedge trimmers, edgers, lawn trimmers, and cultivators. It's sold separately from the gasoline supply line. It can be used with Little Wonder, Mantis, and Echo gasoline engines. This fuel pipe is sold individually.

Most lawn and garden machines operate on fuel, typically gas or a blend of gas and oil. The system for delivering fuel to the engine relies on fuel lines with durable seals and connections. The fuel grommet on many power tools is designed for use between the fuel tank and the filter. It is meant to secure the line and ensure there is no leakage and only minimal movement. This replacement fuel grommet is designed for Echo, Shindaiwa, LIttle Wonder, and other makes and models of lawn and garden gear. This includes trimmers, pruners, chainsaws, and many other small engine machinery. This is an OEM replacement part that will ship individually and will require pliers to install. It is important to ensure that this is the appropriate size and gauge for the machine in question prior to the repair.

A starter rope is wrapped around the recoil drum starter pulley. The starter spring creates tension for the rope to recoil. It is 2.25 inches in diameter on the outside of the pulley and 0.25 inches in diameter on the inside of the pulley. If the starter spring has gone bad, consider replacing the recoil drum starter pulley while repairing the other part. It may be that the damage of the starter spring has chipped the drum, or the drum may be worn from the friction of spinning as the rope uncoils and recoils. If the recoil drum starter pulley is damaged, it may not spin freely. This could prevent the engine from starting. The replacement of this part should be quick and easy and only requires a screwdriver and pliers to complete. The recoil drum starter pulley works with trimmers, hedge trimmers, pole saws and pruners, leaf blowers/vacuums, small engines, chipper shredders, edgers, tillers, and water pumps manufactured by Echo, Little Wonder, Mantis, and Shindaiwa brands. It is a genuine OEM part.

This is a starter grip that is used on many different types of lawn and garden equipment. The starter is the part that engages the pull rope when the user yanks on it. This causes the engine to turn quickly enough for the ignition module to make a spark. This spark is used to ignite the gasoline in the cylinder. The starter grip is made of durable plastic but can become damaged, broken, or lost. The starter grip has an important function in starting the tool while also being comfortable to use.If the starter grip needs to be replaced, a socket wrench and a screwdriver will be required. Put the tool on a flat surface and remove the spark plug wire before making the replacement. Disassemble the tool to reach the starter assembly so the grip can be removed. Replace the grip and reassemble the parts.This starter grip is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The starter grip has been designed to fit tillers, edgers, string trimmers, hedge trimmers, and leaf blowers manufactured by Mantis, Little Wonder, and Echo.

This OEM choke rod replacement is designed for use with select trimmer/edger models. The choke rod is installed on the unit to provide the user with access to the choke, allowing them to control the speed and fuel flow to the engine. The choke controls the engine speed and performance by restricting the flow of air to the carburetor to improve the air-fuel mixture for better performance in lower temperatures. Over time, the choke rod can become worn or it may be damaged due to impact. In either situation, a proper replacement with a part like this is necessary. This choke rod is manufactured by Echo and designed to work with a number of models from this brand and Little Wonder. There are dozens of compatible units that can take this part. The choke rod consists of the metal rod and the plastic handle and is a fairly easy part to replace. Be sure to disengage the spark plug and disconnect any power to the engine before replacing the choke rod or other engine components. This is sold as a single unit and does not include any hardware or additional parts.

The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.

Combustion engines use carburetors to manage the amount of air and fuel entering the chamber. However, to start some combustion engines, a choke is required. This part regulates the air pressure within the intake manifold. This effectively adjustes the air and fuel levels entering the engine, and allows more fuel to reach the inside to ensure that it starts easily. The choke valve is then opened as the machine runs. The choke is installed through a grommet that ensures a good seal, but the grommet can wear out over time. This replacement choke grommet is designed for an array of small engine machines, including pruners, trimmers, saws, and edgers made by Little Wonder and Echo. This OEM replacement part is sold individually and is made of long lasting rubber. It does not include any other components in the assembly.