Mastercut Chipper Shredder Gasket & Seal

This is a cylinder head gasket that is an OEM replacement part sourced directly from the manufacturer for use on lawn mowers and other small engines in outdoor lawn and garden equipment. The head gasket is the engine block that separates the cylinder head from the engine block. This gasket is used to prevent oil from mixing with coolant. The cylinder gasket seal also seals the internal combustion process, putting it under the pressure it needs to operate. If the gasket is worn or cracked and the pressure is not right, the engine will not operate correctly, and there will be a loss of power. Oil leaks are another way to tell that the cylinder head gasket is bad and needs to be replaced. Before deciding if the cylinder head gasket is the problem, a compression test should be run using a compression gauge. After pulling the starter cord, the internal pressure should read 60 psi. If the reading is less than this, the cylinder head has lost compression, and the gasket should be removed and replaced. This cylinder head gasket is sold individually. This gasket is designed for use on lawn mowers and small engines manufactured by MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky.

The carburetor gasket is installed between the engine and the carburetor body, providing an airtight seal so that all fuel and air going into and out of the carburetor are delivered at optimal pressure for peak engine performance. This gasket can wear down over time and create leaks in the seal, which allows air to escape and can affect the operation of the engine. In the event that the engine won’t stay engaged or isn’t running properly, there may be a problem with the gasket seal. Be sure to let the engine cool completely before working on this part. Drain the gas tank and work in a well-ventilated area. This genuine OEM carburetor gasket replacement will offer an exact fit for compatible lawn and garden equipment engines, including those from MTD, Craftsman, Troy-Bilt, Yard-Man, Husky, and Cub Cadet. This gasket is sold individually as a single part.

This part is a replacement carburetor insulator gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn carburetor insulator gasket in outdoor power equipment. Gaskets are essential, as they ensure that the space where components join together is sufficiently sealed, which helps to prevent leaks. Gaskets are subject to wear and tear over time, causing them to become brittle, worn, and ineffective. Thus, this part will need to be replaced. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this carburetor insulator gasket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this carburetor insulator gasket is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This dipstick oil fill o-tube ring is a genuine MTD part. It is manufactured as a replacement part for various push walk-behind mowers, self-propelled walk-behind mowers, tillers, snowblowers, leaf blowers, log splitters, wood chippers, and other small engines.This part is used to check the level of oil in these machines. Dipstick o-rings especially may become too dirty or damaged to be useful anymore. They may also become lost or damaged. Being able to check the oil is an important maintenance step, so this part must be replaced if necessary. This is a genuine OEM part sourced directly from the manufacturer and sold individually. It is compatible with machines made by many brands, including Huskee, Husky, Yard Machines, MTD, Remington, Yard-Man, Cub Cadet, Craftsman, and MasterCut.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This crankcase cover gasket is a genuine MTD part. It is made for use on several models of log splitters, chippers-shredders, leaf blowers, lawn mowers, wood chippers, and similar machines. This part seals the halves of the crankcase. It is not abnormal for the crankcase cover gasket to become worn over time, but it can also be important to replace it whenever it is disassembled for another engine repair. This ensures that the seal is fresh and complete. This crankcase cover gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines manufactured by Craftsman, Cub Cadet, Huskee, Husky, Mastercut, MTD, MTD Gold, Troy-Bilt, and Yard-Man.

This part is a replacement intake valve seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or worn intake valve seal in outdoor power equipment.The intake valve seal prevents leaks and seals the intake valve, which can be found inside the engine housing. Valve seals should be checked regularly and replaced if worn, brittle, broken, or ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular intake valve seal, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This intake valve seal can be used with a variety of outdoor power equipment models manufactured by MTD, Craftsman, and other brands.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.