Mcculloch Chainsaw Fastener

This clutch washer kid includes a clutch, a washer, and a clip. A washer helps to protect the engine from unwanted pressure at the joint where two parts connect. Washers help to spread the pressure evenly so that the fastener doesn’t move, which would cause corrosion and friction. Washers can wear down or corrode over time, leading to unwanted pressure in the chainsaw’s engine. Based on the location of this washer, replacing it may require different steps to take apart the engine. Be sure that the engine has cooled completely before attempting any repairs. This part is compatible with Poulan and Craftsman chainsaws and is a genuine OEM part sourced directly from the manufacturer.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This replacement part is a transmission insert and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This transmission insert is used in chainsaws and allows the transmission to operate smoothly. A new transmission insert might be needed if the current one is damaged or missing. If there are noises coming from the inside or the appliance won't stop or start properly, it might be due to a bad transmission insert. Be sure the engine is completely turned off before attempting to start this repair. Because this part is close to other areas that can be dangerous, it is recommended that the user wear work gloves during the job to prevent injury. This transmission insert is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit. This part is sold individually.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This replacement part is an insert transfer and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Insert transfers are small but very important to many different appliances like chainsaws. These parts reduce friction inside of the motor and piston. Without this part the engine could become damaged.A new insert transfer might be needed if the user hears noises coming from the equipment that are not normal. If there is excess heat coming from inside the appliance this might also be the cause. It is common that insert transfers become stripped overtime due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.