Mtd Trimmer

This is a vacuum bag that is a genuine manufacturer replacement part from MTD. The bag is used on select models of vacuums and blower/vacs to collect the debris that is swept up by the unit. The bag is made of durable canvas material and features a reinforced connection to the unit. Over time, however, the bag may develop a tear or the connection to the hose could become damaged. This could require replacement of the entire bag. To install the bag, simply remove the adapter and take the old bag off of the unit. Then, put the new bag into place, replace the adapter, and test the unit to make sure that the bag is secure. Always wear gloves when performing repairs and make sure the unit is not operational for safety. There are no tools required for the replacement of this bag.This OEM vacuum bag replacement is designed to be used in select leaf blowers and vacuums from MTD, RYOBI, Troy-Bilt, and Yard-Man. The bag is sold individually and does not include the adapter that attaches the bag to the housing.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a housing assembly. It is a genuine replacement part made by MTD. This part is typically found in chainsaws and is responsible for containing the fuel inside the appliances.A housing assembly might be needed if the user notices that the fuel is not being held properly. This can be to damages over time like cracks or chips, as well as normal wear and tear. Be sure the engine is properly turned off before attempting to repair or replace this part. It is also recommended that work gloves be worn while working near other dangerous parts like chains. Refer to the user guide for more specific information. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This vacuum tube assembly is a genuine MTD part, sold individually. This vacuum tube assembly can be used as a replacement part in a leaf blower. The purpose of the vacuum tube assembly in a leaf blower is to facilitate the directional channeling of the air flow pumping into and out of the leaf blower so that the air can be directed by the operator toward the leaves that the operator seeks to blow out of the way, as the appliance is intended to do.The vacuum tube assembly in a leaf blower might be subject to damage at some point within the typical lifespan of the leaf blower; if the vacuum tube assembly is punctured, dented, cracked, chipped, warped, or eroded to the point that the air flow cannot be directed in the proper way or that air flow cannot be filtered out of the opposite end of the tube, the vacuum tube assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vacuum tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, and Yard Machines.

This replacement part is a harness. This part is a genuine replacement part made by MTD. This harness is made up of many different wires and is responsible for helping certain parts work together inside the machine.A new harness might be needed if the user notices that the current one is unable to stay attached. The wires in the harness might have become stripped down over time and might need to be replaced because of years of normal wear and tear. Caution should be taken when repairing this device. Be sure the engine is completely powered down and cooled off before attempting to repair this specific harness. Refer to the correct user manual before starting this repair. This part is also sold individually and is sourced directly from the manufacturer to ensure proper fit. Note that This is a genuine OEM replacement part.

This cutting chain is a genuine MTD part, sold individually. This cutting chain can be used as a replacement part in a chainsaw. The purpose of the cutting chain in a chainsaw is to utilize the teeth on the outside of the chain to rotate and chop through wood and timber when in operation.The cutting chain in a chainsaw might be subject to replacement if the teeth break off or that the chain cannot rotate as usual when propelled to do so by the engine. If the teeth of the cutting chain are dented, warped, cracked, punctured, or eroded, the cutting chain should be removed and replaced by this genuine OEM replacement part. This could occur from general wear and tear over long-term use or as the result of an accident with the chainsaw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. This cutting chain is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Murray.