Bosch Range HGS8655UC Parts

Small securing fastener that holds components in place inside your wall oven. Replace when original hook is broken, bent, or missing to restore attachment.

The Nozzle Set is an OEM component specifically designed for Bosch liquid gas ranges and cooktops. Comprised of precisely engineered nozzles, it distributes gas flow evenly across burners for consistent, controllable cooking temperatures. The nozzle set allows optimal combustion necessary for full burner functionality.

Symptoms of a faulty set include: 

• Irregular or uneven heating from certain gas outlets
• Inability to achieve desired heat levels on low to medium flames  
• Possible yellow flame tips instead of blue burning efficiently
• Reduced gas pressure output requiring replacement

Causes of a damaged nozzle set are mineral buildup and gradually reducing orifice diameter. Physical damage like cracks could also occur from improper cleaning tools over time.

Replacing with this genuine Bosch set restores balanced heating performance. Compatible with some Thermador, Gaggenau, and Dacor appliances, it supports enjoyable home-cooked meals for years to come with OEM nozzles.
 

The Regulator is an OEM part designed specifically for Bosch gas ranges and cooktops. It controls gas flow precisely according to the heat settings selected on the control panel. The regulator maintains safe, consistent gas pressure that enables full functionality across all burners. 

Causes of failure include mineral buildup restricting the gas valve opening over extended use. Physical damage from drops or accidental impact can also compromise regulation ability.

Symptoms include:

• Inability to achieve desired temperature levels across burners
• Gas pressure fluctuations between settings instead of consistency  
• Possible yellow flame issues or inefficient combustion
• Safety concerns requiring immediate replacement

Replacing with this genuine Bosch regulator restores optimized performance. It is also compatible with some Thermador, Gaggenau, and Dacor appliance models. Reliable pressure control supports enjoyable homemade meals with focused burner control from an OEM part.
 

This thermocouple is a temperature-sensing tube used in gas appliances to detect flame/temperature and help the appliance run safely and reliably. It restores accurate temperature feedback for proper operation. What it does:

• Senses temperature/flame presence and converts it to a voltage signal used by the gas control system
• Helps the appliance detect a flame failure condition and prevent unsafe operation
• Can resolve intermittent ignition or shutdowns when the thermocouple has failed
• Functions as the temperature feedback component in the burner assembly

• One thermocouple temperature-sensing tube

• Turn off gas and electrical power to the appliance before servicing
• Handle sensor tube carefully; avoid kinking or bending the sensing end
• Verify correct routing and secure connection to the gas control per OEM instructions

This temperature regulator is the thermostat control used to monitor and regulate appliance temperature, restoring reliable temperature response and helping maintain consistent cooling or heating performance. What it does:

• Senses temperature and signals the appliance control to adjust compressor/heating cycles
• Restores proper temperature control when the unit runs too cold, too warm, or cycles irregularly
• Replaces a failed or intermittent thermostat that prevents stable temperature maintenance
• Works as the primary user- or control-board-referenced temperature sensing/regulation component

• Power off and unplug the appliance before accessing internal controls
• Handle electrical connectors and sensor elements carefully to avoid damage
• After installation, verify proper operation through a full temperature cycle

This thermocouple is a flame-sensing safety device for gas ranges and ovens that helps confirm the pilot or burner flame is present so the appliance can operate safely. It replaces a worn or faulty sensor to restore reliable flame detection. What it does:

• Detects the presence of a pilot or burner flame and signals the gas valve to stay open
• Commonly used in gas ovens and ranges as the flame safety sensor
• May be replaced if appliance won't light, flame won't stay lit, or oven/burner won't heat reliably
• Works as part of the gas safety system to help prevent unlit gas flow

• One thermocouple flame sensor

• Disconnect power and turn off the gas supply before starting any service
• Handle fittings carefully; do not kink or excessively bend the sensor probe
• Tighten gas connections to manufacturer torque specs and test for leaks after installation

A small mounting seating used to position and support related appliance components for correct alignment and operation. Replacing worn or damaged seating restores proper fit and helps reduce noise, vibration, or misalignment. What it does:

• Holds and centers mating parts to maintain proper alignment during use
• Helps stabilize panels or assemblies to reduce rattling and vibration
• Prevents uneven wear by keeping components seated correctly
• Can be a factor when parts skip, rub, or fit loosely

• Disconnect power and water (if applicable) before beginning any repair
• Typical install requires basic hand tools; handle carefully to avoid damage to surrounding parts
• Inspect adjacent fasteners, clips, and seals and replace if worn

This time selector is the user control dial that lets you choose wash cycles and run times on compatible dishwashers, restoring reliable cycle selection and front-panel control. What it does:

• Acts as the front-panel dial used to set wash cycle length and options
• Sends user inputs to the dishwasher's control system so selected cycles start and run
• Commonly replaces a worn, cracked, or unresponsive selector dial
• Helps resolve symptoms like a stuck or loose knob, unresponsive cycle selection, or incorrect cycle timing

• One time selector assembly

• Disconnect power before beginning any service to prevent shock or damage
• This part mounts on the console; remove the door inner panel or console trim as needed per your model's service instructions
• Handle internal connectors and ribbon cables with care; ensure all connectors are fully seated on reassembly

Replace worn dishwasher rack rails to restore smooth gliding and full extension. Fixes sticking or unstable lower racks. Confirm fit with your model number.

Uneven flames or poor burner performance? This gas cooktop burner cap restores proper flame pattern and protects the burner head. Quick 5-minute fix.

Replacement spring for wall oven door or latch mechanisms. Needed when original spring is broken, stretched, or missing, affecting door closure or operation.

Burner cap sits on top of the burner head on gas ranges. Replace if cracked, chipped, discolored, or missing to protect the burner assembly and distribute flame.