Bosch Freezer KAD63A71 Parts

Replaces a cracked, broken, or missing refrigerator door bin tray. Restores secure storage for bottles and items in the door compartment.

Rubber foot that cushions and stabilizes your refrigerator, preventing sliding and surface scratches. Replace if worn, cracked, or missing.

Reduces odors and keeps food fresher by trapping impurities. Replace every 6 months or when odors return. Verify fit with your refrigerator model number.

Fix a warm fridge or freezer alarm with this temperature sensor. Replaces faulty thermistors causing incorrect temperature readings and food spoilage.

Connects filtered water supply to your refrigerator's dispenser and ice maker. Replace if you notice leaks, reduced water flow, or inadequate ice production. Verify fit with your model number before ordering.

Freezer not staying cold? This refrigerator freezer fan motor circulates air to maintain proper temperatures. Fixes warm freezer issues.

This replacement tray is a removable cutlery and utensil insert that helps organize silverware for thorough cleaning and easy unloading. Fits into the dishwasher's rack to keep items separated and positioned during a wash cycle. What it does:

• Holds forks, knives, spoons and small utensils securely in the rack so water reaches all surfaces
• Prevents items from nesting together for improved cleaning performance
• Keeps sharp utensils contained for safer loading and unloading
• Helps reduce movement and noise of loose utensils during a cycle

• One replacement tray/utensil insert

• Place the tray into the designated slot or area in the dishwasher rack until it snaps or rests securely
• Ensure utensils are placed handle-down when recommended by your dishwasher manual to avoid blocking spray arms
• Do not force the tray into place; check alignment with rack guides to prevent damage
• Disconnect power to the appliance before attempting any repairs that require disassembly beyond removing the tray

Refrigerator won't cool or compressor won't start? A failed thermal fuse cuts power to protect circuits. This safety cutoff restores normal operation.

If your refrigerator isn't cooling evenly or runs too warm, this fan motor assembly circulates air to maintain proper temperatures throughout the unit.

This drain gutter is the molded channel that collects and directs wash water toward the dishwasher drain, helping prevent pooling at the tub base and under the door. It restores proper water flow inside the lower tub area. What it does:

• Channels leftover wash and condensation to the pump/drain to avoid water buildup under the door
• Helps reduce leaks and water pooling at the bottom front of the tub
• Replaces cracked or warped gutters that cause misdirected drainage or visible water inside the door area
• Matches OEM shape so water follows the intended path to the drain system

• One drain gutter

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door or lower access panel per the service instructions to reach the gutter
• Handle carefully to avoid damage to the molded edges and to prevent contact with sharp cabinet or panel edges
• Secure mounting so the gutter seats fully to the tub and mates properly with adjacent seals

The Motor is an OEM part for Bosch refrigerators. This motor is specifically designed to power the ice dispenser mechanism, allowing for the convenient dispensing of ice cubes or crushed ice. It delivers the necessary power to rotate the dispenser auger, providing you with a steady supply of ice whenever you need it.

A bad motor can occur due to wear and tear, electrical malfunctions, or motor failure. Signs of a faulty motor include the ice dispenser not working, the auger not rotating, or unusual grinding or buzzing noises during ice dispensing.

Symptoms of a bad motor include:

• Inability to dispense ice  
• Noisy or erratic operation 

Replace your malfunctioning or worn-out ice dispenser motor with this genuine OEM Bosch part to restore your refrigerator's ice dispenser. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The adjusting screw allows you to level your refrigerator and adjust door alignment, typically located at the base of the unit. Replace when the screw becomes stripped, corroded, or can no longer properly support or adjust the refrigerator.

This door seal fits around the dishwasher tub opening to keep water and steam inside during cycles. Replacing a worn gasket restores a tight seal so the door latches properly and helps prevent leaks at the sides or bottom.

• Creates a watertight barrier between the door and tub during wash and rinse cycles
• Helps contain steam and reduce moisture escaping from the front of the unit
• Replaces a flattened, cracked, torn, or deformed seal that can cause leaks
• Common symptoms include drips at the front edge, water on the floor near the door, and needing extra force to latch

• Disconnect power and, if applicable, shut off the water supply before servicing
• Pull the old seal from the channel; clean the groove and mating surfaces thoroughly
• Press the new seal in evenly without stretching; seat corners fully and position the joint at the bottom center
• Close the door to help the seal set; a snug fit at first is normal

Fix a sagging or misaligned refrigerator door with this door hinge. Restores smooth opening, closing, and proper latching. Moderate DIY repair.