Gaggenau Range BS270630 Parts

This metal mesh grease filter captures airborne grease and large particles from range hood airflow to help keep the vent and exhaust path cleaner and reduce greasy buildup on internal components. What it does:

• Traps cooking grease and large particulates before they reach the blower or ducting
• Helps reduce greasy residue and buildup on internal hood surfaces
• Can improve airflow consistency when the filter is clean
• Common symptom: heavy visible grease, dark film on the filter, or smoke/odors not clearing effectively

• Turn off power to the range hood or vent before servicing
• Remove the old filter per the hood's access method (clips, slides, or screws), then insert the replacement securely
• Clean or replace regularly per the appliance owner's manual; do not operate with a damaged filter

Fix an oven with no power at the display panel with this main control board assembly. Direct replacement part restores electronic functions. DIY-friendly.

Fix washer overfilling or not filling properly with a new float assembly. This part regulates water level in your washing machine. Simple repair.

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This fan motor powers the appliance's vent/air blower to move airflow for drying and heat circulation, helping maintain proper temperature and prevent overheating. Direct replacement for the listed part number. What it does:

• Drives the vent/blower to circulate air for drying and heat dispersion
• Restores proper airflow when drying performance is poor
• Stops or reduces loud bearing/rubbing noise if the original motor is failing
• Helps prevent overheating by moving air across components

• Always disconnect power before servicing the appliance
• Handle electrical connections carefully; match wire terminals and secure connectors
• Test motor operation before fully reassembling the appliance
• Follow OEM service instructions for removal, replacement, and torque specifications

This is a steamer heating element made to be used on wall oven units. This particular part heats the water in the water tank. Allow the appliance plenty of time to cool down before attempting to repair or replace any component.If the heating element is not glowing an orange or red color, this is an indication that the part may be bad. When the water in the water tank is not heating, it can be because this part is no longer working properly. This ring element is a durable replacement part. Wear work gloves to protect the hands during this process. Disconnect this appliance from the power source before starting to replace the part. Use caution during the replacement procedure.This part is sold individually and is sourced directly from the manufacturer. It is compatible with wall ovens that are manufactured by the Bosch brand, including Thermador and Gaggenau.

This water inlet hose supplies fresh water to the appliance's fill system, restoring proper fill and preventing leaks where the original hose is cracked or worn. Durable replacement for the factory inlet connection. What it does

• Delivers incoming water from the home supply to the appliance's fill valve and tub.
• Restores normal fill when original hose is split, pinched, or leaking.
• Helps prevent intermittent or no-fill symptoms caused by damaged inlet tubing.
• Works with the appliance's existing clamps and fittings when installed correctly.

• One water inlet hose assembly as shown

• Turn off water supply and disconnect power before replacing the hose.
• Inspect fittings and replace any damaged clamps or seals; tighten to a secure, leak-free fit.
• Route the hose to avoid kinks and pinching; test with a short fill cycle and check for leaks.

This water drain hose routes wastewater from the appliance to the household drain so the unit can empty properly. Durable flexible hose built to resist kinks and normal wear, restoring reliable draining and preventing pooling. What it does:

• Directs wastewater from the appliance pump to the drain plumbing
• Replaces cracked, split, collapsed or clogged drain tubing
• Helps stop leaks, slow draining, and water pooling in the appliance base
• Works with the appliance's pump and drain fittings to maintain proper flow

• Turn off and unplug the appliance and shut off water supply before starting
• Remove access panels as needed to reach hose connections; note routing before removal
• Ensure hose is seated fully on fittings and secured with the proper clamps; avoid sharp bends or kinks
• Test for leaks after reconnecting power and water; for routing specifics

This is a connection piece used in ranges and ovens to join internal plumbing or drainage components. It ensures a secure, leak-free connection between fittings. Replace this part if you notice leaks, cracks, or a loose connection at the joint where it is installed.